1. equipment Description:
The unit uses AC servo drive technology, centralized control by a
PLC computer system to complete the roll material rewinding.
Configure touch human-machine interface to enable the
implementation of action, process, process data become digital
management and control .Product quality and control accuracy is
guaranteed with a substantial increase.
Used in conjunction with stroboscope to check the beginning and end
of each piece of defective memory locationsUsed in conjunction with
stroboscope
System Configures 36 groups standard memory, and uses a
stroboscopic to check the beginning and end of each piece of
defective locations memory , so that the entire volumes of grinding
material are completely inspected under high speed .
Auto-Searching function of rewinding with memory data automatically
completes rewinding location and parking finishing operations.
2.Device technical index:
KT350F | KT350F |
Adapted materials | Drum-like print film, luminant laminating film |
Drum-shaped70g / m |
Material Width | 50~350mm |
Material range | 0.005~0.025mm thin film materials |
35~70g/m paper |
Rewinding speed | 180m/min MAX(rewinding) |
150m/min MAX(QC) |
Tension Accuracy | ±3N |
Total Power | 5KW |
Power supply | 380VAC 50/60HZ |
dimension | 1900mm×1000mm×1200mm（ lengthwidthheight ） |
3. device functions
1) Unwinding part: Tension Range: 1 ~ 15Kg Diameter: f 92 ~ 400mm
positive inversion coil winding, cutting testing,volume path
monitoring, tension anomalies mornitoring functions. Mechanical
structure: cantilever inflatable axle loading and unloading
material. Corrective devices:Photoelectric servo system, automatic
edge
2) Host Division: Line Speed: MAX 180m/min control functions:
positive and negative run, jog, start the pre-speed, automatic
memory speed, running speed settings, joging speed setting.
3) The winding Department: Tension Range: 1 ~ 15Kg, to allow
error3N.
Control Function: taper tension control, tension zero speed
maintaining both positive and negative roll coil and the winding,
cutting testing, roll diameter monitoring, tension anomalies
monitoring function.
KT350chanical physical map
